Synthesis of the new chiral tridentate ligand bis(pyrid-2-ylethyl) menthylphosphine and its use in the palladium-catalyzed allylic alkylations

We describe the synthesis of a new asymmetric P,N,N′-tridentate ligand (bis(pyrid-2-ylethyl) menthylphosphine, BPEMP), containing two pyridyl rings and (1S,2R,5S)-menthylphosphino group. The ligand is obtained in five steps from natural abundant l-menthol. The coordination behavior of the ligand toward cationic (allylic)Pd(II) moiety and its first application in palladium-catalyzed asymmetric allylic alkylation are presented. Crystallographic and spectroscopic analyses reveal that [(η³-allylic)Pd(BPEMP)]⁺ complex forms only one isomer in the solid state as well as in solution.     

DSC Investigations of DDAB,DTAB and DHAB Vesicle Aqueous Solutions in Presence of SDS

Interactions of anionic surfactant sodium dodecyl sulphate (SDS) with vesicles formed by synthetic dialkyldimethylammonium bromides i.e. didodecyldimethylammonium bromide (DDAB), ditetradecyldimethylammonium bromide (DTAB), dihexadecyldimethylammonium bromide (DHAB) have been examined by using differential scanning microcalorimetry and electron transmission microscopy. The temperatures and standard enthalpies characterising gel to liquid-crystal transitions increase significantly with increase of SDS concentration for all investigated systems. It means that incorporation of SDS monomers in these vesicular bilayers significantly stabilises their gel states. Moreover, in case of DDAB and DTAB vesicle systems added SDS limits kinetic features of recorded isobaric heat capacity dependencies on temperature observed earlier for the pure vesicular solutions. This revised version was published online in July 2006 with corrections to the Cover Date.     

Direct Barbier-type allylation of aromatic acetals and dioxolanes in the presence of β-cyclodextrin in water

A new and convenient procedure for the synthesis of homoallylic alcohols directly from aromatic acetals and dioxolanes has been developed with very good yields under biomimetic conditions using a Zn-mediated Barbier-type allylation in the presence of β-cyclodextrin in water.     

New Hexazirconium Clusters Containing Hydrogen Atoms

Reduction of ZrBr₄ with HSnBu₃ yielded a blue solid. When this blue solid was treated with PMe₃, a hexanuelear cluster [Zr₆Br₁₄H₄( PMe₃)₄] (2) was isolated. Reaction of the blue solid with [PPh₄]Br in CH₂Cl₂ resulted in the formation of a paramagnetic and unstable cluster anion, [Zr₆Br₁₈H₅]^2– (3), which disproportionated to form a new cluster anion, [Zr₆Br₁₈H₅]^3– (4) and some Zr(IV) species. Compounds containing 4 can also be obtained from reaction of the blue solid with Br^– in MeCN. Reduction of ZrCl₄ with HsnBu₃ gave a red–brown solid, and [Zr₆Cl₁₄H₄(AsMe₃)₄] (9) and [Zr₅Cl₁₂H₄(AsMe₃)₅](8) were obtained by reaction of the red–brown solid with AsMe₃. No cluster compounds containing amine ligands were obtained in the reaction of the red–brown solid with amines; only compounds containing the [Zr₆Cl₁₈ H₅]^3– anion and ammonium cations were isolated. Altogether ten products were characterized by single crystal X-ray diffraction and where possible, by ¹H NMR studies.     

Volumes,heat capacities and solubilities of amyl compounds in decyltrimethylammonium bromide aqueous solutions

Apparent molar heat capacities and volumes of amylamine (PentNH₂) 0.02m, capronitrile (PentCN) 0.02m and nitropentane (PentNO₂) 0.009m in decyltrimethylammonium bromide (DeTAB) micellar solutions, in water and in octane were measured at 25°C. By assuming that their concentration approaches the standard infinite dilution state, heat capacities and volumes were rationalized by means of previously reported equations following which the distribution constant between the aqueous and the micellar phase and heat capacity and volume of the additives in both phases are simultaneously derived. The present results are compared to those we have previously obtained for pentanol (PentOH). The thermodynamic properties of PentNH₂ in water and in micellar phase are substantially identical to those of PentOH but different from those of PentCN and PentNO₂ whereas the opposite behavior was observed in their pure liquid state and in octane. The nature of the solvent medium seems to affect the thermodynamic behavior of PentNH₂. Also, the study of the apparent molar heat capacities of the amyl compounds investigated here in micellar solutions as a function of surfactant concentration shows evidence of a maximum at about 0.4m DeTAB, which can be attributed to a micellar structural transition. Accordingly, the solubilities of PentCN and PentNO₂ as a function of the DeTAB concentration drop in the neighborhood of the concentration where heat capacities display the maximum.     

Mixed micelles of tetradecyltrimethylammonium bromide and chlorhexidine digluconate in aqueous solutions of isopropyl alcohol

The influence of isopropyl alcohol (IPA) on the size and composition of the mixed micelles in mixtures of tetradecyltrimethylammonium bromide (TTAB) and chlorhexidine digluconate (CG) has been determined as a function of the composition of the systems. The addition of 0.5 M and 1.0 M IPA had little significant effect on the composition of the mixed micelles as determined both by analysis of critical micelle concentration (CMC) data using a theoretical treatment based on excess thermodynamic quantities and by an empirical treatment of conductivity data. Static and quasielastic light scattering measurements showed a progressive decrease of the aggregation number and hydrodynamic radius of TTAB micelles on addition of IPA, but minimal changes in the properties of the small CG aggregates. The results show that the micellar weight in the TTAB/CG/IPA solutions is determined by the ratio of the surfactants in the system and for each TTAB/CG ratio decreases on addition of IPA.     

Reactivity of N-alkyl derivatives of hydroxylamine in decomposition of 4-nitrophenyl diethylphosphonate in water and in cetyltrimethylammonium bromide micelles

Neutral forms of hydroxylamine, N-methylhydroxylamine, and N,N-dimethylhydroxylamine are typical α-nucleophiles in water. In comparison with aryl anions of similar basicity their rate of reaction in the decomposition of 4-nitrophenyl diethylphosphonate is increased by about 10² times. Decomposition of the substrate is accelerated in cetyltrimethylammonium bromide micelles (about 4 to 30 fold). Hydroxylamine and its N-alkyl derivatives are the most effective low basicity nucleophiles. The sole factor responsible for the micellar effects is the concentration of the reagent in the surfactant micelles. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 43, No. 4, pp. 231–236, July–August, 2007.     

Velocity map imaging of the photolysis of n-C4H9Br in UV region

Using velocity map ion imaging technique, the photodissociation of n-C₄H₉Br in the wavelength range 231–267 nm was studied. The results and our ab initio calculations indicated that the absorption of n-C₄H₉Br in the investigated region originated from the excitations to the lowest three repulsive states, as assigned as 1A″, 2A′ and 3A′ in C_s symmetry. Dissociations occurred on the PES surfaces of the three states, terminating in C₄H₉+Br (²P_3/2) or C₄H₉ + Br^* (²P_1/2) as two channels, and being impacted by an avoided crossing between the PES surfaces of the 2A′ and 3A′ states. The transition dipole to the 1A″ state was perpendicular to the symmetry plane, so perpendicular to the C–Br bond. The transitions to the 3A′ state was polarized parallel to the symmetry plane, and also parallel to the C–Br bond. While the transition dipole to the 2A′ state was in the symmetry plane, but formed an angle of about 53.1° with the C–Br bond. We have also determined the avoided crossing probabilities, which affected the relative fractions of the individual pathways, for the photolysis of n-C₄H₉Br near 234 nm and 267 nm.     

Formation at low surfactant concentrations and characterization of mesoporous MCM-41

At low concentrations of cetyltrimethylammonium bromide,all silica-based mesoporous materials with hexagonal phase have been synthesized via interactions between self-assembled surfactant molecule aggregates and aniomc silicate polymers.The resulting materials are characterized by XRD,FT-IR,solid state 29Si MAS NMR,thermal analysis and N2 adsorption-desorption measurements.After soluble ions are removed,the interactors between surfactant micelles and silicate polymers are reorganized and then form mesostructures 1 he hexagonal framework is sonsistent with amorphous silica gel.The structures of materials depend on the synthesis conditions Hydrothermal process improves the interactions between molecules and increases the degree of framework silicon atom polymerization The.surface area and the mesopore volume of the material prepared at 100℃ increase by 87% and 71 %,respectively,compared with those obtained at room temperature.     

Progress on phthalocyanine-conjugated Ag and Au nanoparticles: Synthesis,characterization, and photo-physicochemical properties

Phthalocyanine (Pc) complexes are an important class of dyes with numerous (e.g., biological, photophysical, and analytical) applications. Among the methods used to improve the properties of these complexes, one should mention the introduction of different substituents, variation of the central metal ion, ligand exchange, and conjugation to nanomaterials (e.g., carbon-based nanomaterials and metal nanoparticles (NPs)). This work briefly reviews Pc complex conjugation to Ag and Au NPs, highlights the different NP shapes, and discusses the diversity of conjugation approaches. Moreover, the use of UV–Vis spectroscopy, powder X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, atomic force microscopy, dynamic light scattering and Fourier transform infrared spectroscopy to characterize Pc-NP hybrids is summarized. The effect of conjugation on Pc photo-physicochemical properties (fluorescence, singlet oxygen generation, triplet state formation, and optical limiting behavior) is discussed, and future perspectives for the synthesis and applications of new hybrids are provided.